Methods To Fix Print Spooler Service Error 1068

The Print Spooler service on Windows operating system is responsible for handling all the print jobs and if it stops the printer wont print. This is a very common printer issue and most of the time it can be easily fixed. Even outdated drivers can cause printing issues and it is solved by getting them updated. You should know that many of the printer issues can be easily troubleshot at home and the necessary steps can be found in the help section of the OS. Shared below are details on fixing Print Spooler Service Error 1068.

Usually the print spooler error is fixed by restarting the spooler services and this can be done by opening the Windows Services Manager, scrolling down to the Print Spooler services, then right clicking and selecting restart. If this didn’t work and gives the message “Windows could not start the Print Spooler service on Local Computer, Error 1068, The dependency service or group failed to start”. This error is displayed because the Print Spooler service is dependent on many other services and some of these services might not be working properly.

Option 1 – Try configuring the dependency via CMD

Open command prompt and then type in “sc config spooler depend=RPCSS” and press Enter. After it has been executed, restart your computer to check if the problem has been fixed.

Option 2 – Fix dependency error via Registry Editor

If the previous step didn’t work you can then try fixing it with the Registry Editor.

First open the Run Command box by tapping “Windows” key + R and in it type in “regedit” and hit Enter to open the Registry Editor. In the window that appears, navigate to the key “HKEY_LOCALMACHINE\SYSTEM\CurrentControlSet\Services\Spooler” on the left hand side. Next, right click on the “DependOnService” entry in the right hand side and choose Modify. After that, change the value data to “RPCSS” and click OK to save changes and exit Registry Editor. Now, reboot the computer to see if the issue is resolved.

Option 3- Try Running Printer Troubleshooter

The other alternative option is running the Printer Troubleshooter that is built in Windows 10 and it can solve most of the printer issues. It also checks whether you have latest printer drivers, printer connectivity issues and are the required services running etc.

First you open the Run command box by tapping “Windows” key + R, then you type in “exe/id/PrinterDiagnostic” and hit Enter. Then, in the Diagnostics window click “Next” and follow on-screen instructions to fix issues with the printer.

Following these steps will help you to fix Print Spooler error and you need not worry thinking why is my printer not printing?


How To Fix Faint Print Problems

Faint print or faded text is a commonly found problem associated with all printers. Most people will think that this is because of thelower levels of ink or toner. Sometimes this assumption will be right.However, this problem can occur even if there is enough ink in your printer. In this case, there might be some other problems associated with your printer that is causing it to print faint or faded text. Therefore, through this article, we list some of the steps you can do for fixing this issue. If you are wondering why is my printer not printingproperly, these steps might help you to fix it.

Low Ink And Toner Levels

This is the first thing you have to check if your printer is not printing properly. Faded text might be a result of your cartridges running low. You can check this easily on your PC by visiting the printer properties/cartridge status on your control panel. This will help you to know the amount of ink or toner present in the cartridges, and whether they are causing this issue.

Toner Sticking To The Fuser Roller

Fuser is an important part of your laser printer that heats the toner powder thereby causing it to stick and seal the paper for creating a print. Sometimes toner can get stuck to the upper roller of the fuser. This could be the problem associated with your printer if you see a ghosted image of the print out somewhere else on your page.

This could be a solution for people who think that why my printer is not printing properly. For finding out if this is the issue associated with your printer, remove your fuser unit and check for the presence of toner stuck to the upper roller. If it does, then it is better to replace it with a new one for retrieving the efficiency of your printer.

A Low Ink/Toner Density Setting

Why Is My Printer Not Printing

Some printers will allow you to adjust the density settings of the ink and toner. Sometimes, it might have set as low by default. Therefore, if your printer has ink/toner density settings, you can find it when you click on your printer in “Devices & Printers”. If you find the density is set low, then increase it slightly and try printing again.

These are some of the common problems associated with your printer if it prints faint or faded text. These steps can be helpful for people who are thinking why is my printer not printing in proper colors.


How To Know It Is Time To Replace The Printer?

If you have been using printers for a very long time you know that after a few years they start to malfunction and it is very common. This is because they are electronic devices with many mechanical components and are bound to fail. Usually, when the printer wont print it displays error codes and there are different codes for different issues. In some minor cases you can fix at home and in other cases it is better to take it to an authorised service centre. But, if it is very old, better to replace with a new one as repairing would cost you a lot. How can you tell when to replace the printer?

The Printer Is Unable To Meet Your Requirements

The primary purpose of any stand alone printer is printing, and in the case of all in ones they copy, scan or even fax. It is time to replace the printer if the page yield is not up to your requirement, stops functioning either completely or partially, the paper holding capacity is less than your growing need etc. The page yield of the printer does not change, and what was once fine may not meet your current demand. In certain cases, it can be fixed by using toner or ink cartridges that give a higher page yield.

The Performance Is Unsatisfactory

Sometimes, your requirement grows and you would require a printer that prints fast. Slow print speed can be either due to it being an older model or an indicator that the internal components are failing. In many cases, old or failing parts cause print blemishes and it can be due to faulty ink or toner cartridge. But, if it persists even after replacing them, then it is better to replace the printer.

The Model Is Outdated

Just like any other electronic devices print technology also advances providing new capabilities such as higher print speeds, automatic double sided printing, scanning, wireless printing etc. One of the big disadvantages of using an old printer is, replacing old parts can be expensive and difficult. It is better to replace the printer if it is more than five years old. Also, as it gets older it becomes harder to get the toner or ink cartridges.

Printer Component Breakdown

The most important indicator that says it is time to replace the printer is when it begins to malfunction. There are many signs, and some can be easily fixed while others not so easily. For example, you will hear clicking or grinding sounds and it can be due to a loose gear or roller.

So better than asking “Why is my printer not printing?” for old printers, understand that these are indicators that it is time to buy a new printer.


How To Fix Printer Printing Yellow In Place Of Red

any ask ‘why is my printer not printing yellow when my source file info is in red?” Like Windows cannot connect to the printer, this is common. Read to fix…

Some users report that their printer is printing files in red despite the source document content having the yellow color. This is one of the common printer problems, which users of HP® printers face. It happens when the printheads are unclean or the ink is about to run out. Are you wondering why is my printer not printing yellow? Worry not, because here, we will look at three ways to fix the issue. If a method does not help you fix it, try the next one.

Clean Your Printheads

Cleaning these printer elements multiple times can fix some printer problems. To do it, follow the below-mentioned steps.

  • Put plain papers into the printer input tray/feeder.
  • On the control panel of the printer, touch the Right Arrow button to see more options.
  • From the options list, choose Setup.
  • Choose Tools to see the printer Tools Menu.
  • Choose the “Clean Printhead” option.
  • Wait for your printer to finish the cleaning process. After it is done, press OK.
  • The device will then print a trial page so that you can look at the results.
  • In the event you are unsatisfied with the results, then do one more printhead cleaning. Do it thrice or four times if required.

Align Your Printhead

  • Put plain paper into the tray.
  • Touch the abovementioned arrow button to see the second screen of navigation.
  • Choose the “Tools” option from the menu, and touch Align Printhead.
  • Wait for your device to align it. After the process is completed, print one alignment page.
  • Ensure that you print one more test page to know whether the problem is fixed.

Check the Ink Level

Now, you should know how low the level of ink is. The device uses various colors to mix and print the file in the necessary color. When any cartridge has low ink, then you should replace it with another genuine one. For instance, if it is not printing in red, you should check for both cyan and red cartridge’s ink levels.

  • Touch the Setup key on the device’s control panel.
  • Touch the down arrow button, then choose Tools and touch OK.
  • Choose the “Display Ink Gauge” option, and then press OK Then, the cartridges’ ink levels will be shown on the control panel.
  • Change the printer cartridge if necessary.